Add a screen

For Samsung signage displays (SSSP / Tizen). Tested on: QB55B (Tizen 6.5), QB13C (Tizen 7.0), QM50C (Tizen 7.0), QM32C (Tizen 7.0), QB13R-T (Tizen 4.0).

1. On the display, open URL Launcher settings and set the address to http://7001.live. The display downloads and installs the player by itself.
2. The player starts and shows Pair this screen with a 6-character code and a QR code.
3. In your console, open Screens, choose Add screen and enter the code. Or scan the QR code with your phone and confirm. The screen appears in your console.

No QR code or no phone?

On the display, choose Type a code instead. In the console, create a code for a new screen. The code has 8 characters, can be used once and is valid for 7 days. Type it on the display with the remote control and press OK.

At most ten registration attempts per hour are accepted from one internet connection. Each screen that joins uses one, and a refused code uses one too. If you are setting up more than ten screens, add ten, then continue an hour later.

If the display says its code has expired, choose New code on the display. If a typed code is refused, create a new code in the console and type that one.